Travertine Classico Roma Pool Copings & Deckings

Size and Shape

Travertine Classico Roma pool copings are produced in 3cm thickness with standard widths of 300mm and 350mm, and lengths from 400mm to 1200mm. Edge profiles include full bullnose (rounded over the pool edge for a soft, comfortable grip), half-round/rounded, and square-edge contemporary profiles. Internal and external corner pieces (90-degree and radius corners) are available to match straight copings, ensuring a clean, continuous border around freeform and geometric pools. We also fabricate step treads, wall caps, and overflow-channel copings to project drawings. Decking tiles in coordinating sizes (400x400mm, 600x400mm, French pattern) are available from the same block lot for visual consistency across the entire pool surround.

Value Integration

Our integrated Shuitou factory produces pool copings from block through finished edge profile on-site. After gang-saw cutting to 3cm slabs, coping pieces are cross-cut to width and length, then profiled on automated edge-shaping machines with diamond routers that create the bullnose or rounded edge in a single pass. Tumbled copings are processed in barrels with abrasive media to soften edges and surfaces; honed copings pass through continuous polishing heads; bush-hammered copings receive their textured surface on specialized machines. By controlling every production step, we deliver matching copings, corners, and decking from the same block lot at factory-direct pricing — with no third-party edge fabricator adding cost or lead time.

Production Flexibility

We supply pool builders, landscape contractors, and stone distributors with full container quantities. Minimum order is 50 linear meters of straight coping plus associated corner pieces; full containers typically hold 200–300 linear meters depending on width and crate configuration. For large commercial pool projects, we reserve block lots to ensure all copings, corners, and decking share consistent color and veining. Standard lead time is 18–25 days after order confirmation. Each piece is individually inspected for edge profile consistency, surface finish, and dimensional accuracy before being packed in foam-lined crates with corner protection. Crates are labeled by piece type (straight, internal corner, external corner, radius) for easy site distribution.

Performance and installation: travertine's natural porosity gives it two key advantages for pool environments — it stays cool underfoot and provides slip-resistant grip when wet. We recommend tumbled or bush-hammered finishes for maximum safety; both keep a slip-resistant surface when wet. Install copings on a reinforced concrete bond beam with polymer-modified thin-set mortar, and use a flexible, waterproof grout in joints. Maintain a 1.5–2% slope away from the pool edge for drainage. With periodic pressure washing and resealing every 3–5 years, travertine pool copings will retain their appearance and performance for decades.